[AT] Spam> bearing cross-reference

[John Hall]

Mark, when you get a chance, try these 2 IH numbers and see if you have any 
luck switching over to industry standard bearing numbers: ST239 and ST278. 
One of them has a snap ring on the outside, I believe it is the first one.

John Hall

----- Original Message ----- 
From: "Mark Greer" <markagreer at embarqmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Monday, January 04, 2010 10:42 AM
Subject: Re: [AT] Spam> bearing cross-reference


>I work for a bearing and power transmission supply house. Email me the
> numbers you are looking for and I'll check my interchanges. I can do most
> bearings, seals, and belts.
> Mark
>
> ----- Original Message ----- 
> From: "John Hall" <jthall at worldnet.att.net>
> To: "Antique tractor email discussion group" 
> <at at lists.antique-tractor.com>
> Sent: Saturday, January 02, 2010 11:04 AM
> Subject: [AT] Spam> bearing cross-reference
>
>
>> Anybody know of a decent site that can cross reference bearings by the
>> equipment manufacturers part numbers? Sure would be handy to have when 
>> you
>> aren't near the old bearing and a set of calipers!
>>
>> John Hall
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at


--------------------------------------------------------------------------------



Internal Virus Database is out of date.
Checked by AVG - http://www.avg.com
Version: 8.0.427 / Virus Database: 270.9.10/1809 - Release Date: 11/24/2008 
9:03 AM