[AT] New tractor shed
Ralph Goff
alfg at sasktel.net
Wed Dec 15 17:25:20 PST 2010
On 12/15/2010 7:01 PM, Dan Folske wrote:
> Had a break in the weather today. It was about 25F and no wind. I was able to take the afternoon off from the office and we started putting the
> tin on the roof of a 40x40 pole building. The building has a 12’ 3” sidewall and by putting a scissors rafter in the number 2 position we will be able to have a
> 16’ wide overhead door with a full 12 foot clearance. I’ll actually have a building I can get my loader tractors into. It won’t have heat and only a gravel floor but at least they will be out of the wind and snow.
>
> _____________________
Dan I know you will appreciate having your tractors under cover in the
shed. Mines the same, just a clay/gravel floor but plenty good enough
for my uses.
We have the same problem here with unfrozen ground. Anywhere I push snow
I have to be so careful of the blade will gouge into the ground. Never
seen that before in winter. The heavy snow came before the ground froze
and now its insulated. I even hit unfrozen patches in the field where
the tractor sank in the mud today.
Ralph in Sask.
More information about the AT
mailing list