[Farmall] Farmall H oil level and types

[E. John Puckett]

  Engine oil is SAE 30, and is checked via the 2 petcocks on the side of 
the oil pan.   Transmission, differential, belt pulley, and pto all have 
a common oil supply.  That is 90 wt gear oil and is checked via a small 
pipe plug low on the left side near the front of the transmission.  It 
is filled via the round plug with 3/4 inch square recess near the 
sterring wheel support.  Most people are very negligent aobut the tranny 
oil on them, and it probably needs changed, but it takes about 6 gallons 
if I remember correctly.  Most oil suppliers and farm supply places have 
it in 5 gallon buckets a lot cheaper than the little quart bottles sold 
at WAlly World, Autozone, etc.

On 8/30/2010 11:49 PM, Mark.Hohls at bmw.co.za wrote:
> I have just bought an H  and am not sure which grade oil I should best use in the engine as well as in the Transmission/ Differential. Furthermore can somebody advise as to how I check my filling levels?
>
> Appreciate your assistance!
>
> Regards
> Mark
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>

-- 
Edgar John Puckett
10142 Mahagony Rd.
Potosi, Mo. 63664
573-438-2799
mobil 573-210-0061