[Farmall] Replacement bolt for 340U fast hitch needed

[Mike Sloane]

There are several 3/4" bolts called out on the drawing for the Fast 
Hitch in the 330/340/340U parts manual. They are associated with the 
Drawbar stabilizer brace, if that is what you are describing. The bolts 
don't have part numbers, so it would appear that IH just replaced them 
with regular bolts. The two sizes are 2" long on the left side and 
2-1/2" long on the right side. I suppose you could always drill them out 
for wire if necessary.

Contact me off-line at <mikesloane at verizon.net> if you want me to send 
you a .pdf copy of the appropriate parts manual pages.

Mike

On 8/30/2010 7:03 AM, br549 at hemc.net wrote:
> I have messed up the head on one of the bolts that
> mounts the forward plate of the fast hitch. These
> bolts have a head that requires a 1 1/8" socket and
> are drilled from all faces so that they can be safety
> wired. I imagine a 330U, 340 Farmall and similar
> models will have the same hardware.
>
> If you have one or can put me touch with someone that
> can sell me one, that would be great.
>
> Regards,
>
> Bryan
>
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>