[AT] Case SC Rim Replacement

[jahaze at aol.com]

It's easiest to just take the rim off, and much lighter too

Enjoy, Joe



-----Original Message-----
From: tnobles at netsync.net
To: Antique tractor email discussion group <at at lists.antique-tractor.com>
Sent: Sun, Aug 29, 2010 7:02 pm
Subject: [AT] Case SC Rim Replacement



Case SC that I bought from a neighbors family was loaded with calcium and 
you know what the rim looked like.  Well, the tube recently gave way and the 
calcium is now gone. (big bare spot on lawn)  The tire is flat and the rim 
is useless.  So my question is;

    What is the best way to take the rim off.  Should I take the entire 
wheel off (two bolts on each side of the axle).   Or should I take the rim 
off the wheel (bolts around the rim on both sides ).  The only other rim I 
ever did was four bolts and it came right off.

Thanks
Tim Nobles
tnobles at netsync.net
South Dayton, NY

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at