[Farmall] fan pulley and set screw

[Mike Sloane]

Good Work!!!

There are a couple of places on the outer sheave where you can put a 
brass punch and gently tap, tap, tap. After a while it will start to 
move. Don't get crazy with the hammer - you don't want to be calling 
around to salvage yards for a new sheave...

Mike

On 8/4/2010 5:00 PM, William Ransom wrote:
> Yesterday, after the last time I checked my email, I got the jam nut
> unscrewed, and the set screw came out with it. After I loosened something on
> the front of the fan, I was able to push the fan blade forward far enough to
> get a ratchet there and unscrew the jam nut. I sprayed some PB Blaster in
> the hole where the set screw was, and also on the threads at the front side
> of the pulley, but I still haven't gotten the front half of the pulley to
> move.