[AT] Brake Controller

[charles bridges@hughes.net]

My truck did about like what you are saying.  As some of these guys have 
already said, check the ground.  I ran another ground wire back to the 
battery neg. side and that fixed my problem.

charles
----- Original Message ----- 
From: <jahaze at aol.com>
To: <at at lists.antique-tractor.com>
Sent: Monday, April 26, 2010 12:47 PM
Subject: Re: [AT] Brake Controller


>
> Thanks guys, I will try a few of those suggestions.  I have to boys who 
> can help to push on the brake petal.  I suspected it was the truck side 
> plug (figured it had warn after 14 years), so I replaced that on Friday 
> and am still having the same problems.
>
> I figured there had to be some power through the plug in order to have the 
> brake lights come on.  I am wondering if the controller is somehow not 
> allowing enough power through to activate the brakes?  Is that how they 
> work (the higher the setting, the more voltage they allow through, the 
> more pressure applied to the trailer brakes?)  I turned the controller all 
> the way up and still nothing.  Is this something I could check with a volt 
> meter?
>
> Enjoy, Joe
>
>
>
>
>
>
> -----Original Message-----
> From: Len Rugen <rugenl at yahoo.com>
> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
> Sent: Mon, Apr 26, 2010 12:04 pm
> Subject: Re: [AT] Brake Controller
>
>
> Take a scrap broom handle or other light piece of wood and cut it to
> ength to wedge in between the seat and brake pedal.  As long as the
> ndicator light comes on, it doesn't take much pedal pressure on the
> ime delay controllers.
> Check your ice scraper if it's a long one, mine works for this also :-)
> ______________________________________________
> T mailing list
> ttp://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at