[Farmall] Light Switch for a Cub converted to 12v
Robert Luscomb
rluscomb at yahoo.com
Wed Apr 7 07:03:44 PDT 2010
Go to one of the parts sites and you can find an oem style 12v switch or you can save a little bit of money go to the local auto parts store and buy a 12v toggle. Be sure to change out the 6v bulb in the rear or it will blow out big time. Hope this helps. Robert
Sent from my iPhone
On Apr 6, 2010, at 22:15, Dale <flya737 at aol.com> wrote:
I recently had my '55 Cub converted from 6v to 12v, and everything is fine, except the lights were not switched to 12v. I bought two 12v sealed beams for the front (not installed yet), but have yet to buy for the rear. My question is, what light switch do I put in? (the old one was just a toggle switch with the toggle broken off - I assume it was NOT an original switch) Is there anything else that needs to be done? As I said, I have been running it just fine for a year...just never addressed the light situation. Thanks for any help.
Dale Finch
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall
More information about the AT
mailing list