[AT] (no subject)

[Richard Fink Sr]

Thanks Greg the problem with mine was my fault not the unit. When i 
cleaned and re greased the dist. I used lubri plate and it was not 
letting the original spark adjustment work right.
Cleaned it all again and oiled with 3 in1oil now it works great
R Fink
PA


At 06:49 AM 4/6/2010 -0500, you wrote:
>I've got one in a VAC Case and another in a MM R.
>Timing had to be reset on both of them after installation.
>Both of them run great, start easy and no longer require a new set 
>of points every year.
>
>Greg
>http://www.casemanaugie.com
>
>
>-----Original Message-----
>From: at-bounces at lists.antique-tractor.com 
>[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Richard Fink Sr
>Sent: Monday, April 05, 2010 3:55 PM
>To: antique tractor email discussion group
>Subject: [AT] (no subject)
>
>Hi this is on topic i think.
>How many have switched over there tractors to the Pertronix ignition.
>What were your results.
>I just done one on a 8N with front distributor. Now my timing is OFF
>motor runs very labored. Called factory to busy to talk to anyone
>will call back as call received.  Yes i checked that dis. was not out
>i/2 turn.
>Some day i will learn not to say yes i will do it for you.
>Thanks
>R Fink
>PA
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at