[AT] Looking for parts for a 1953 Allis Chalmers CA

[Rob Wilson]

For any small A-C tractor parts check out Roger Van Camp for your needs.
Roger has a ton of used, new and reproduction parts that he sells,
260-747-3455. No one knows the little A-C's better. 
Rob
1944 Allis-Chalmers C
1957 Allis-Chalmers WD45 

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Kent Blomgren
Sent: Tuesday, September 08, 2009 7:40 AM
To: Antique tractor email discussion group
Subject: Re: [AT] Looking for parts for a 1953 Allis Chalmers CA

Bruce Fallon wrote:
> I already ordered new brakes off Ebay but am looking for clutch and 
> probably pressure plate  also this has a little side clutch to allow 
> stopping with the trans in gear to continue running the PTO and 
> Hydraulics I need facing for that clutch.
>
> Part numbers in my books indicate
> Disk assembly for side clutch 225370 I have written in my book $128 
> must have priced that at one time for the other tractor don't want to 
> spend that much.
>
> Disc facings for side clutch 225610  Rivets 911131 Brake return 
> springs 207320 Throw out bearing 211273  possibly as long as I am in 
> there.
> Clutch disc 225312
> Pressure Plate 216805
>
> Ideas for the best place to get these parts reasonably.
>
> Bruce Fallon
> Langley,WA 98260
> bfallon at whidbey.com
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>   
Have you tried TonysTractors in Turner Or 503-767-3660 ? I just talked to
him on the phone  Saturday and bought a used D15 manifold from him.  
I was very impressed with the whole experience.
Kent Blomgren

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at