[AT] WD-45 Rim

[Len Rugen]

Yep, got a few samples of that on this set of rims too  :-)    The 
problem is that the old-timers USED these tractors and had them full of 
Ca-Cl. I still use it, but only for light work, so I have them mounted 
dry.  Nothing (at least 2WD) beats a dry, wide front WD-45 for getting 
around in the mud, not much weight, so they stay on top. 

charliehill wrote:
> Fixing a stem hole is easy.  Weld a piece of  metal somewhere between 14 ga 
> and 1/8th inch or so over the old hole, then fill in the hole and grind it 
> smooth.  Then drill an new hole somewhere else on the rim.  A washer will do 
> in a pinch. Weld a big washer over the hole then put a bolt through the 
> washer and weld it in.  Then grind off the bolt off smooth on both sides.
>