[AT] Thanks!

[Indiana Robinson]

On Sat, Oct 10, 2009 at 7:09 AM, Mike Sloane <mikesloane at verizon.net> wrote:
> One of the advantages of the rivet spinner tool is that you can change
> the section(s) out (in the shop or in the field) without removing the
> bar from the mower, you don't need a hammer, chisel, special punch, or
> supporting block - just a box wrench to  run the two tools down. One
> tool punches out the old rivet, and the second one supplies the pressure
> to set the section securely in place against the bar, then puts pressure
> on the rivet to enlarge it, and finally round the end to produce an even
> surface that won't catch on anything. As they say in the ads: "try it,
> you'll like it".
>
> Mike
===================================


I'll get Mikey to try it, he will try anything... ;-)
-
That's Life. :-)



-- 
Have you hugged your horses today?

Francis Robinson
aka "farmer"
Central Indiana USA
robinson46176 at gmail.com