[AT] 98 Dodge 3500 update

[oldiron62 at gmail.com]

I will try this out in the morning. I did not get a chance today.  And just 
run through email.
Let ya know what I find.
Kevin M


----- Original Message ----- 
From: "Doug Tallman" <dtallman at accnorwalk.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, May 26, 2009 11:38 AM
Subject: Re: [AT] 98 Dodge 3500 update


> Steve, if you are talking about the way I typed it, then it is a
> nitpick! When I write by hand, my O and my 0 are hard to distinguish
> from each other. However, the idea of searching it with both characters
> is a good one and one I didn't think about. I don't know what search
> engine you used but Google came up with info more relevant to Kevin's
> problem sooner with the O instead of the 0. Both searches seem to list
> forums with questions on the codes on the first page. I'm sure it was
> just how the original questions were typed. Your supposed to be able to
> type a code into Alldata and it should find it. I tried your suggestion
> and it didn't make a difference. It wouldn't come up with it either way!
> Their search function leaves a lot to be desired in my opinion.  Doug T
>
> Stephen Offiler wrote:
>> This might seem like a nitpick, but it's not.  That is P "Zero" 753
>> (without spaces) not P "letter O" 753.  I mention this because the
>> quality of any Internet searching Kevin or others might try to do will
>> be vastly improved if you use the zero.  This is a fact; I just tried
>> it.
>>
>> Steve O.
>>
>> On Tue, May 26, 2009 at 11:14 AM, Doug Tallman <dtallman at accnorwalk.com> 
>> wrote:
>>
>>> Kevin, checked the trouble chart for the PO753 today. On a Dodge it is
>>> the code for the O/D sol circuit. The circuit is monitored continuously
>>> when the key is on and is also used as the test for trans relay
>>> function. Clear the code and see if it resets on start up or if you have
>>> to put it into neutral to get it to set. Doug T
>>>
>>>> -----Original Message-----
>>>> From: at-bounces at lists.antique-tractor.com
>>>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
>>>> oldiron62 at gmail.com
>>>> Sent: Saturday, May 23, 2009 1:31 PM
>>>> To: Antique tractor email discussion group
>>>> Subject: Re: [AT] 98 Dodge 3500
>>>>
>>>> Ok this is what I find with scan tool, PO 753
>>>> Shift solenoid A circuit Electrical .
>>>> Autozone (where I borrowed the scanner from) said they could not get
>>>> parts
>>>> to fix. That it was internal transmission ?
>>>> Kevin Mosier