[Ford-ferguson] Ford-ferguson Digest, Vol 60, Issue 10

[Bob Jeffers]

Here is a place that rebuilds the paper pulleys for tractors
http://www.paperpulleys.com/pages/home.html

----- Original Message ----- 
From: <ewatness at comcast.net>
To: "Ford-Ferguson mailing list"cwi813" 
<ford-ferguson at lists.antique-tractor.com>
Sent: Thursday, May 21, 2009 7:01 PM
Subject: Re: [Ford-ferguson] Ford-ferguson Digest, Vol 60, Issue 10


>
>
> I would VERY much like to have a copy of that. I have 2 belt pulleys with 
> one working much better than the other. I will likely rebuild the one but 
> I have no idea where to find parts if they are available at all. I am 
> still looking for a replacment metal pulley or drum or whatever it is 
> called. The diagram willohelp me with that too I imagine;. Please mail a 
> copy to me at Eric Watness, 1509 10th West, Seattle, WA 98110 my email is 
> ewatness at comcast.net . I am happy to pay for copying costs as well. 
> Thankyou!
>
>
>
>
> ----- Original Message ----- 
> From: cwi813 at mchsi.com
> To: ford-ferguson at lists.antique-tractor.com
> Sent: Thursday, May 21, 2009 3:45:41 PM GMT -08:00 US/Canada Pacific
> Subject: Re: [Ford-ferguson] Ford-ferguson Digest, Vol 60, Issue 10
>
> With regard to message 3 below:
>
> I have a reprint of the "Ford Tractor - Ferguson System - Service Manual 
> for Owners and Mechanics," published by Harry Ferguson, Inc., Dearborn, MI 
> in 1943.
>
> On pages 58 and 59 you'll find a nice verbal description as well as an 
> exploded diagram to show how to move belt from left to right for the PTO 
> to provide you different functions. " Belt Pulley The belt pulley can be 
> attached quickly to the rear of the tractor after removing the power 
> take-off shaft cap and check chain brackets. It is a self-contained drive 
> with with a 9" diameter and a 6.5" width pulley. Its speed is 1358 R.P.M. 
> The pulley gear ratio to power take-off shaft is 1.87 to 1. Rotation in 
> either direction can be had by mounting the belt pulley to the left or to 
> the right of the center of the tractor, or it can be mounted with the 
> pulley toward the ground. The latter position is often used when driving 
> an irrigation pump.
>
> The belt pulley contains its own reservoir of oil, and should be kept 
> filled to the high level plug with the same lubricant that is used in the 
> transmission and differential.
>
> Figure 155 shows the belt pulley parts. When it is necessary to overhaul 
> the belt pulley, make sure the new gaskets are used; see that the bearings 
> fit perfectly, and that the bolts and nuts are securely tightened."
>
> I tried to send the exploded diagram to you as an attachment, but the byte 
> size of the scan is too large to send. I'd be happy to mail it to you if 
> anyone wants it, just give me your name and street address. It's a big, 
> clear diagram and all parts are numbered according to the original part, 
> so it's easy to see and read.
>
> Cynthia Wilhelmi
> West Des Moines, IA
> cwi813 at mchsi.com
>>
>> Message: 3
>> Date: Thu, 21 May 2009 08:10:18 -0400
>> From: " Jim Peck @Yahoo "
>> Subject: [Ford-ferguson] Type A power take off, side mounted belt
>> pulley
>> To: ford-ferguson at lists.antique-tractor.com
>> Message-ID: <004d01c9da0d$1cb5db40$562191c0$@com>
>> Content-Type: text/plain;
>> boundary="u5-WppEiWUODn92yuS8EGFo4d2eD8-SYImg5Imk";
>> charset="US-ASCII"
>>
>> I got a tip about David Brown creating an optional PTO/Belt pulley for 
>> the
>> Ferguson-Brown Model A over the opposition of Harry. This link shows the 
>> right
>> side pulley. "Optional equipment included power take off, side mounted 
>> belt
>> pulley"
>>
>> http://www.tractordata.co.uk/david_brown/pages/ferguson_brown/index.htm
>>
>> Was the tractor sold as a Model A or Type A?
>>
>> I would love to have a picture of the PTO.
>>
>> http://groups.yahoo.com/group/MasseyFerguson/join MasseyFerguson and 
>> related
>> brands
>> http://groups.yahoo.com/group/ChallengerTractors/join Challenger brand of
>> agricultural equipment
>> http://groups.yahoo.com/group/TractorsEverywhere/join General tractor 
>> discussion
>> http://groups.yahoo.com/group/EquipmentMechanic/join Construction and
>> agriculture
>>
>>
>> _______________________________________
>> No viruses found in this outgoing message
>> Scanned by iolo AntiVirus 1.5.6.4
>> http://www.iolo.com
>>
>>
>>
>>
>> ------------------------------ 
>>
>> _______________________________________________
>> Ford-ferguson mailing list
>> Ford-ferguson at lists.antique-tractor.com
>> http://www.antique-tractor.com/mailman/listinfo/ford-ferguson
>>
>>
>> End of Ford-ferguson Digest, Vol 60, Issue 10
>> *********************************************
> _______________________________________________
> Ford-ferguson mailing list
> http://www.antique-tractor.com/mailman/listinfo/ford-ferguson
> _______________________________________________
> Ford-ferguson mailing list
> http://www.antique-tractor.com/mailman/listinfo/ford-ferguson
>