[AT] OT(?) Cub Cadet 1812 Hydro question

[Bob McNitt]

Thanks. I'm picking up a new drive belt for the Craftsman tomorrow and will 
let you know if it fixes the vibration. When I make the changeover it'll 
also reveal if there are any separation sections on the old belt.

Bob in CNY

----- Original Message ----- 
From: "Robert McBride" <bob100837 at yahoo.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, June 03, 2009 3:58 PM
Subject: Re: [AT] OT(?) Cub Cadet 1812 Hydro question


>
>
>
>
>
> ________________________________
> Check the belt carefully inside and out. I started my mower last spring 
> and it
> shook so bad I couldn't stand it. It turned out to be the outside cover of 
> the belt
> had a loose spot about 6'' long. A new belt fixed it right up.
>
> Robert McBride retired on the Rideau
>
> Last comment,
> I've not heard of any type of belt failure that would create vibration
> and I'm having a hard time picturing any sort of belt problem that
> would not simply result in a busted belt.
>
> Good luck.
>
> Steve O.
>
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG.
Version: 8.5.238 / Virus Database: 270.12.48/2147 - Release Date: 05/31/09 
20:45:00