[AT] Post Hole Digger

william.neff.powell at comcast.net william.neff.powell at comcast.net
Tue Jun 30 03:34:27 PDT 2009


I'm with Herb, plywood would be nice... With ramps and the come-along you should be fine, may not even have to take it apart. Good luck. 

Will 
Pottstown, PA 
----- Original Message ----- 
From: "Herbert Metz" <metz-h.b at mindspring.com> 
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com> 
Sent: Tuesday, June 30, 2009 6:05:52 AM GMT -05:00 US/Canada Eastern 
Subject: Re: [AT] Post Hole Digger 


Roy; since I so not know about your ramps, would suggest a couple fold-up 
saw horses, couple 2" x 4" x 6'-8' long, and a piece of 3/4" plywood (close 
to 4' x 8', that will easily lay in the bed of your pickup). Some ramps 
have too many places for equipment to snag, fall through, etc. 
Herb 

> [Original Message] 
> From: Roy Morgan <k1lky at earthlink.net> 
> To: Antique tractor email discussion group <at at lists.antique-tractor.com> 
> Date: 6/29/2009 8:40:33 PM 
> Subject: [AT] Post Hole Digger 
> 
> Folks, 
> 
> We are buying a sturdy post hole digger found on Craig's list: 
> Here's the ad with some pictures: 
> http://syracuse.craigslist.org/grd/1243481850.html 
> 
> I have some questions: 
> 
> - How much of this thing can I expect to get apart? It's reported to 
> be a two-man job to move it. (We'll have me, my wife and a 7-year 
> old.) It looks like the auger fastens to the gearbox shaft by a big 
> flange with bolts through them. With luck and some PB Blaster, I may 
> get them loose. 
> 
> -Does the PTO shaft come off in a normal way? Through bolt/shear pin? 
> 
> - It looks like the rear ends of the frame fasten to the gearbox 
> horizontal tubes with bolts. Is it fixed at that point or is there a 
> pivot action there? 
> 
> -Can anyone identify this thing so I can get some information online 
> perhaps? 
> 
> I'll be bringing: 
> - tools 
> - come-along 
> - rope with multiple pulley for hoisting/pulling 
> - furniture dolly - hand truck 
> - portable ramps 
> - Ford F-250 
> 
> Thanks for any information. 
> 
> Roy 
> 
> Roy Morgan 
> k1lky at earthlink.net 
> 529 Cobb St. 
> Groton NY, 13073 
> Home: 607-898-3607 
> Cell: 301-928-7794 
> 
> 
> 
> _______________________________________________ 
> AT mailing list 
> http://www.antique-tractor.com/mailman/listinfo/at 


_______________________________________________ 
AT mailing list 
http://www.antique-tractor.com/mailman/listinfo/at 



More information about the AT mailing list