[AT] Sawzall blades

[John Wilkens]

Don, by all means try the Bosch Heavy Metals blades.  I've used a lot 
of different good blades and the Bosch is the toughest, 
longest-lasting blade I've found.  I use a coarse blue blade.  They 
get worked hard and stand up!    Good luck.     John W.l



At 02:52 PM 06/15/2009, you wrote:
>I am looking for recommendations for a good metal cutting blade for a
>Sawzall.  When I get back to Missouri in a couple of weeks I have to cut a
>bent pin on a backhoe stabilizer arm.  The cylinder needs to come off
>because it has a blown seal and no amount of beating has budged the pin.
>The local shop told him to cut the pin using a Sawzall and what he called a
>demolition blade.   He was told it would take three or more blades.  So what
>would be a good blade?
>
>
>
>Don Bowen  KI6DIU
>
>New ruralize pages, follow the link off http://www.ruralize.com
>
>http://www.braingarage.com/Dons/Travels/journal/Journal.html
>
>
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at


                    In the wide-open spaces of NE Oregon