[AT] Trailer jack question

[Al Jones]

FWIW, I have seen some of these jacks that have a factory oil hole in the
very spot you describe.  I HAVE had good luck spraying penetrating oil/lube
around the top and letting it run down.  Guess it just depends on how bad
they are rusty.

Al

> > I had one like that and pouring oil down around the top did no 
> > good so
> > as you say I drilled a 1/8th inch hole in from the side just 
> > below the
> > top and started spraying and cranking. It loosened up fine and still
> > works freely.
> > 
> > 
> > 
> > -- 
> > Happiness is like peeing in your pants.
> > Everyone can see it, but only you can feel its warmth.
> > 
> > Francis Robinson
> > aka "farmer"
> > Central Indiana USA
> > robinson46176 at gmail.com
> > 
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> > 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at