[Farmall] International A died (and I am baffled)

ebony51 at frontiernet.net ebony51 at frontiernet.net
Wed Jul 1 14:01:28 PDT 2009


Jim, Mike, Charles, et al,  I found the ballast resister. It is back under the gas tank support.  I guess I was look for obvious spot.

Thanks

Larry



----- Original Message -----
From: ebony51 at frontiernet.net
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, July 1, 2009 2:29:10 PM GMT -06:00 US/Canada Central
Subject: Re: [Farmall] International A died (and I am baffled)

Jim,  Interesting.  Maybe there is a ballast resister I am not seeing.  And maybe I should take the external condenser off.  However, whatever the wiring, it has been working...well maybe, the points did burn out...perhaps for a reason beyond normal wear  There was some grease in the area,and I would think grease on points is not a good thing!

Larry

----- Original Message -----
From: "Jim Becker" <jim.becker at verizon.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, July 1, 2009 1:55:33 PM GMT -06:00 US/Canada Central
Subject: Re: [Farmall] International A died (and I am baffled)

That may mean it is time to find a different electrical shop.

I'm unclear as to why the external condenser was added.  If the one is still 
inside the magneto, it would probably be closer to the right value alone 
than having 2 condensers would be.

Jim Becker        jim.becker at verizon.net

----- Original Message ----- 
From: <ebony51 at frontiernet.net>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Wednesday, July 01, 2009 11:08 AM
Subject: Re: [Farmall] International A died (and I am baffled)



> Out of curiousity I took the coil to the local electrical shop that works 
> on starters, magnetors, etc.  The part man checked the numbers and it is a 
> Delco Remy six volt coil without resister.  It said it does not make any 
> difference.  He said coils cannot tell voltage.

> Ummm,  I thought a six volt coil would run hot if twelve volts fed into 
> it.  I have the tractor several years and it is worked fine.  Now there is 
> a solenoid ahead of it froming from the battery and starter.  Also, there 
> is an external condenser connected where the kill switch is connected (and 
> internal condenser in the magneto) to the magneto.

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall
_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall



More information about the AT mailing list