[Farmall] Voltage problem

[E. John Puckett]

Here is a link to a trouble shooting flow chart.  It can be of great 
help.  This one is for systems using a regulator.
http://s101.photobucket.com/albums/m46/farmallbob/Farmall%20Tractor%20Wiring%20Diagrams/?action=view&current=08-Regulatortroubleshootingchartrev.gif

And this one for systems using a cutout .
http://s101.photobucket.com/albums/m46/farmallbob/Farmall%20Tractor%20Wiring%20Diagrams/?action=view&current=07-Cutouttroubleshootingchartrev1_0.gif
John

Jim Becker wrote:
> Leave the lid on the regulator.
> If you believe whoever told you the regulator was good and working, all you 
> can do by stretching the spring is mess it up.  Start checking your wiring 
> and all the ground connections.
> If you don't believe him, diagnose the system from scratch and don't open 
> the regulator until you are convinced it isn't working.
>
> Jim Becker        jim.becker at verizon.net
>
> ----- Original Message ----- 
> From: "Jerry Kleehammer" <sheenajk at rochester.rr.com>
> To: <farmall at lists.antique-tractor.com>
> Sent: Sunday, January 11, 2009 3:19 PM
> Subject: [Farmall] Voltage problem
>
>
>   
>> I have a super C. While running the volt meter reads discharge. I have had
>> the generator and the regulator checked. They are both good and working. I
>> was told that if I take the cover off the regulator and stretch the spring 
>> a
>> little that it would increase the charging to the + side. Has any one else
>> ever had this problem and will this work? This a 6 volt system. There are 
>> NO
>> shorts in the system. Jerry Kleehammer
>>
>> _______________________________________________
>> Farmall mailing list
>> http://www.antique-tractor.com/mailman/listinfo/farmall 
>>     
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>
>