[Farmall] H Lift All

[Kevin Bish]

Carl,
I will check tomorrow afternoon to see if I have those parts. I know a 
couple of the H's I have, still have the belly pumps in them. If you need 
anything else, let me know. I sell new aftermarket parts also, go to 
www.daytontractorparts.com, and check out our site. I will get back to you 
as soon as I can about the parts. Kevin.
----- Original Message ----- 
From: <szabelsk at gdls.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Tuesday, December 08, 2009 2:22 PM
Subject: Re: [Farmall] H Lift All


> Mike,
>
> Already checked with the people I usually deal with this morning, and they
> don't have any. So I will be calling all the other local salvage yards to
> see what they have. I'll call the ones you referenced in addition, since
> you've apparently had good luck with them. Like you said, shipping
> shouldn't be a big deal.
>
> Kevin,
>
> What I need is the short shaft and the two collars that go with it. The
> collars keep the shaft lined up with, and in contact with, the female
> couplings, the collars attached to the shaft with the cotter keys. Let me
> know when you'll possibly have something available. Meanwhile I'll be
> chasing other sources.
>
> The shaft and collars are pretty simple and I could probably have them
> made up real quick in our fabrication shop at no cost. The guys here take
> great pride in making one of a kind things for old stuff. Gives them
> bragging rights for the month. Just don't want to go that route unless I
> really, really have to since it would involve having to take measurements,
> figure out tolerances, etc. Also don't want one of them to do me a big
> favor and make it out of something like titanium (they like to make things
> better than before). Then there's the issue of making something that fits
> too well and having something else break because it didn't have the right
> amount of required slop.
>
> I'll still have see if I get an answer from the PO before I go out and
> order the parts. This effort could be resolved tonight when I get home.
>
> Carl Szabelski
>
>
>
> This is an e-mail from General Dynamics Land Systems. It is for the 
> intended recipient only and may contain confidential and privileged 
> information.  No one else may read, print, store, copy, forward or act in 
> reliance on it or its attachments.  If you are not the intended recipient, 
> please return this message to the sender and delete the message and any 
> attachments from your computer. Your cooperation is appreciated.
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall