[AT] Case VAC

[Indiana Robinson]

On Fri, Nov 27, 2009 at 5:16 PM, Gene Dotson <gdotsly at watchtv.net> wrote:
>    Farmer;
>    Check the linkage where it passes by the engine. There is a bracket that
> the rod slides through. Clean and oil this real good and see if the throttle
> returns alright. May also have to loosen the pivot pin on the foot throttle
> if it is sticking.
>
>                        Gene
>
>
>
>
>> all it actually needs now is a return spring on the throttle
>> "someplace". I haven't looked at it yet but when you open the throttle
>> the governor opens fine but when you try to slow it down you have to
>> push the linkage back with a fingertip to slow it down.
>
> _______________________________________________
=========================================


Gene:
Lubing the rod where it passes through the bracket and lubing the foot
throttle cured it. It is still a tiny bit weak on the return but I
suspect a little "springing" of the spring that is mounted on the
pivot lever (probably not its name) just above the foot throttle may
help that. I'll have to look at it sometime.


-- 
Have you hugged your horses today?

Francis Robinson
aka "farmer"
Central Indiana USA
robinson46176 at gmail.com