[AT] Belarus 822
Cecil Bearden
crbearden at copper.net
Fri Aug 21 19:24:25 PDT 2009
I should have said it was a 825, the 822 model is a 2 wheel drive. I
have been working on it all day to get some minor things done, and
checking all fluid levels. It had a leak under the seat of the cab, and
I had to take the floor out of the cab to tighten a hydraulic line. So
while it was out, I threw away the old wool felt insulation and used a
3/4 thick rubber horse stall mat for a floor mat. It will really dampen
the noise and not collect moisture to rust the cab.
Cecil in OKla
charliehill wrote:
> I've always wondered why US built tractors don't have the down pressure
> hydraulics. I can remember some foreign built tractors way on back in the
> late 50's had it.
> If you needed to change a back tire you just put a block under the drawbar,
> hit the lever and then put some jack stands under the rear axle and you were
> in business.
>
> Charlie
> ----- Original Message -----
> From: "Cecil Bearden" <crbearden at copper.net>
> To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
> Sent: Friday, August 21, 2009 6:13 AM
> Subject: Re: [AT] Belarus 822
>
>
>> I bought a Belarus 822 with a Memo Loader yesterday. Had to drive it
>> home 15 miles. It has a cab and needs the air conditioner compressor
>> replaced, a Sanden compressor, The tractor is a 1990 model with 82
>> horsepower, 4 wheel drive. I really like it and it has a lot of
>> features that are mechanical, no real electronics. Looks like a real
>> reliable dependable tractor. The cab is built heavier than any american
>> tractor, and has a roof hatch that can be opened for a vent. I had no
>> problem with the "greenhouse" effect in the cab with no air conditioner.
>> A lot of tractor for less than $6K. There is one at a consignment
>> sale about 40 miles away next week. I may try to get it also. I have a
>> lot of hay clients that need a loader tractor. Hydraulic control for
>> the loader were on the tractor from the factory. I am really impressed.
>> Not what I expected from all the coffee shop info I have heard over
>> the years.. It will need some cab interior work and a little firt aid,
>> but it was a one owner tractor for an old farmer that used it for
>> feeding cattle and mowing. The 3 point lit has a down pressure that
>> will lift the back wheels. This will really be handy for building
>> fence, installing fence posts and using a post hole digger.
>>
>> Cecil in OKla
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
More information about the AT
mailing list