[AT] Belarus 822
charliehill
charliehill at embarqmail.com
Fri Aug 21 04:02:31 PDT 2009
I've always wondered why US built tractors don't have the down pressure
hydraulics. I can remember some foreign built tractors way on back in the
late 50's had it.
If you needed to change a back tire you just put a block under the drawbar,
hit the lever and then put some jack stands under the rear axle and you were
in business.
Charlie
----- Original Message -----
From: "Cecil Bearden" <crbearden at copper.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Friday, August 21, 2009 6:13 AM
Subject: Re: [AT] Belarus 822
>I bought a Belarus 822 with a Memo Loader yesterday. Had to drive it
> home 15 miles. It has a cab and needs the air conditioner compressor
> replaced, a Sanden compressor, The tractor is a 1990 model with 82
> horsepower, 4 wheel drive. I really like it and it has a lot of
> features that are mechanical, no real electronics. Looks like a real
> reliable dependable tractor. The cab is built heavier than any american
> tractor, and has a roof hatch that can be opened for a vent. I had no
> problem with the "greenhouse" effect in the cab with no air conditioner.
> A lot of tractor for less than $6K. There is one at a consignment
> sale about 40 miles away next week. I may try to get it also. I have a
> lot of hay clients that need a loader tractor. Hydraulic control for
> the loader were on the tractor from the factory. I am really impressed.
> Not what I expected from all the coffee shop info I have heard over
> the years.. It will need some cab interior work and a little firt aid,
> but it was a one owner tractor for an old farmer that used it for
> feeding cattle and mowing. The 3 point lit has a down pressure that
> will lift the back wheels. This will really be handy for building
> fence, installing fence posts and using a post hole digger.
>
> Cecil in OKla
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
More information about the AT
mailing list