[Farmall] 140 Steering Problem

[Al Jones]

The 140 should be factory equipped with "car" type tie rods.  Most likely
your problem is the sector gear keyways are worn and the gear is slipping
on the sector shaft which the center steering arm connects to.

Al


> [Original Message]
> From: <ebony51 at frontiernet.net>
> To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
> Date: 8/18/2009 3:31:58 AM
> Subject: Re: [Farmall] 140 Steering Problem
>
> How are the ball joints on the tie rods?  Sometimes they can get pretty
worn.  The ball or, more likely, the pieces that fit against the ball, can
be worn.  There is someone in Red Power that advertises new pieces for
them.  I would look there before looking into the steering box.

Larry Hardesty

----- Original Message -----
From: "doug hale" <douger55 at yahoo.com>
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Sent: Monday, August 17, 2009 9:34:24 PM GMT -06:00 US/Canada Central
Subject: [Farmall] 140 Steering Problem

Putting the finishing touches on a Farmall 140 and had new tires put on
last week.  Now I can;tdrive due to very sloppy play in the steering. 
anyone have any thoughts or ideas on what to adjust or look for?  Looking
at the breakdown, steering gear is very pricy for my local IH dealer.  I
have pulled the steering shaft and the "worm gear" looks ok.  Having
trouble getting into the steering box.  Can't seem to get the steering arm
off.  Will try to find a puller in the morning and see if that will help.


      

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall

_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall