[AT] Ok now how about George Willer?(roll call)

[Bob McNitt]

Charlie -

Due to the terribly wet late spring and (so far) summer we've had, I've been 
up to my eyeballs keeping up with mowing and bush-hogging. Like a fool, I'm 
also tearing out our old patio to be replaced this year. AND am running a 
new dedicated buried electrical line to our four out buildings.

So my checking on the list usually is when I have a few minutes to spare 
when I'm not either working, eating or sleeping.

Bob in CNY
----- Original Message ----- 
From: "charliehill" <charliehill at embarqmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Thursday, August 06, 2009 4:16 PM
Subject: Re: [AT] Ok now how about George Willer?(roll call)


> Hi Ralph,  I'm glad you checked in.  You were another that hasn't said
> anything lately.   I'm sure there are a lot of others I should ask about 
> but
> I just take them as they pop into my mind.
>
> How are the crops in Sask. this year?
>
> Charlie
> ----- Original Message ----- 
> From: "Ralph Goff" <alfg at sasktel.net>
> To: "Antique tractor email discussion group" 
> <at at lists.antique-tractor.com>
> Sent: Thursday, August 06, 2009 3:41 PM
> Subject: Re: [AT] Ok now how about George Willer?(roll call)
>
>
>>> The traffic on our  list has slowed down to the point that sometimes I
>>> think
>>> we need to have a roll call.
>>>
>>> Charlie
>>
>> Charlie, its slow alright but I'm still here reading whatever does show 
>> up
>> on the list. I've been working on newer stuff lately, removing the pto
>> drive
>> and hydro pump from my CIH 1660 combine for repair. Lots of heavy lifting
>> and expensive parts but we are slowly getting it back together.
>> http://www.redpowermagazine.com/forums/index.php?act=attach&type=post&id=73057
>> Did put in a little old tractor time recently running the Cockshutt 40 on
>> the New Holland sickle bar mower cutting some hay. The hay field (old
>> yard)
>> was so rough that it loosened up the spline on one of the rear axles of
>> the
>> 40 and I had to tighten it up yesterday. It had started to leak oil and
>> was
>> making a clunking noise that caught my attention. Don't want to run it
>> that
>> way for long or it will ruin the splines.
>> (Wish I could repair my neck and back joints as easily).
>>
>> Ralph in Sask.
>> ----- Original Message ----- 
>> From: "charliehill" <charliehill at embarqmail.com>
>> To: "Antique tractor email discussion group"
>> <at at lists.antique-tractor.com>
>> Sent: Thursday, August 06, 2009 12:55 PM
>> Subject: [AT] Ok now how about George Willer?
>>
>>
>>
>>
>> --------------------------------------------------------------------------------
>>
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com
>> Version: 8.5.392 / Virus Database: 270.13.45/2285 - Release Date: 
>> 08/06/09
>> 05:57:00
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at


--------------------------------------------------------------------------------



Internal Virus Database is out of date.
Checked by AVG.
Version: 8.5.238 / Virus Database: 270.13.8/2226 - Release Date: 07/08/09 
21:51:00