[Farmall] Farmall not starting---still!

Roger Showers showersroger at yahoo.com
Mon Aug 3 03:24:53 PDT 2009


mabey you it out of time when you changed gear

--- On Sun, 8/2/09, ebony51 at frontiernet.net <ebony51 at frontiernet.net> wrote:


From: ebony51 at frontiernet.net <ebony51 at frontiernet.net>
Subject: [Farmall] Farmall not starting---still!
To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
Date: Sunday, August 2, 2009, 9:43 PM



Well, I am still not  the Farmall A started.  No spark to points.  I put on new points and new condenser.  Set ththe points at .20 and cleaned them.   Had the coil checked.  Put in new distributor gear (old one had a chip in it so the rotor had quite a bit play in it).   Put a new magneto cap on it (it is converted from magneto to 12 volts and the magneto is being used as a distributor.  Put a new wire from the end of the condenser to the base of the points (that is a pain) thinking that it might have a short in it.  

Finally quite tonight at 9:30.  Any suggetions. 

I have been messing with this thing off and an on now for a month.

Larry H.  









_______________________________________________
Farmall mailing list
http://www.antique-tractor.com/mailman/listinfo/farmall



      



More information about the AT mailing list