[AT] Looking for a 26" disk blade?

[charlie hill]

Well I thought the same thing and was surprised when I couldn't find 
anything bigger on their web site.  I was in the store the other day and it 
seems to me like there were some HUGH ones in there.  I guess a phone call 
will tell you.

Charlie
----- Original Message ----- 
From: "Al Jones" <farmallsupera at earthlink.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Monday, September 29, 2008 9:19 PM
Subject: Re: [AT] Looking for a 26" disk blade?


> Charlie,
>
> Somebody told me that they may have some bigger ones. I want to say I have
> seen something similar there before, but who knows?  I am going to give
> them a call as soon as I can and see if they have anything that will work.
> If I have to, I don't mind drilling the holes myself.
>
> Al
>
>
>> [Original Message]
>> From: charlie hill <charliehill at embarqmail.com>
>> To: Antique tractor email discussion group <at at lists.antique-tractor.com>
>> Date: 9/29/2008 9:05:48 PM
>> Subject: Re: [AT] Looking for a 26" disk blade?
>>
>> Al, I just checked Agri-supply online.  The biggest thing I could find
> there
>> was 24".
>>
>> Charlie
>> ----- Original Message ----- 
>> From: "Al Jones" <farmallsupera at earthlink.net>
>> To: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>;
> "Antique
>> Tractor Internet Service" <at at lists.antique-tractor.com>
>> Sent: Monday, September 29, 2008 4:21 PM
>> Subject: [AT] Looking for a 26" disk blade?
>>
>>
>> >
>> >
>> > Everyone,
>> >
>> > I am looking for a 26" disk blade, that fits an IH # 152 disk plow,
> used
>> > on
>> > the Farmall Cub.  I expect the same blade was used on other IH disk
> plows.
>> > The IH number is PO12314, a sub. number is PO15801.  So far, none of my
>> > sources have been able to come up with anything.  The unique thing
> about
>> > it
>> > is it has 4 holes in it for plow bolts to hold it onto the hub.  I want
> to
>> > check Agri-Supply, but haven't yet because I wanted to see if I can 
>> > find
>> > something "genuine."  My old blade is in good shape, but is worn down 
>> > to
>> > about 22" and tends to want to "bulldoze" rather than cut. A used one
>> > would
>> > be ok, if it was close--say within a half inch or so-- to 26".
>> >
>> > Please help....
>> > A
>> >
>> > _______________________________________________
>> > AT mailing list
>> > http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at