[AT] 350u steering valve

[Paul Waugh]

Kevin
sounds like you have a plan if you know bolt length. I have no idea about 
anything on this tractor, but maybe someone else does.
I took care of  Dad for 2 yrs, but not as bad as you have it

Paul - IN

----- Original Message ----- 
From: <oldiron62 at gmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Friday, September 05, 2008 9:22 PM
Subject: [AT] 350u steering valve


>I finally got another priorty valve today. the last one got lost in the
> mail. Had to go order bolts 61/2" grade 5, and a pack of orings. All these
> local stores bolts just had 6"  and the junk no grade (soft) bolts on up
> 7-8" an I didnt want to cut them off and cut more threads on a junk bolt. 
> So
> i should be getting the tractor ready for the loader install soon as the
> bolts arrive.  This valve was hard to find, since they usually come with a
> tractor attached.
> I thought that I would say something since everyone has been testing to 
> see
> if the list was working. Any of yall know witch part or place in the
> sandwich this prioity valve needs to be ? It can go inside of the lift 
> valve
> or on the outer side ?
>  I have had to leave everything go since she  had the stroke, but she is
> barley able to talk. We been going and feeding her some everyday, just to
> try keeping her hydrated.
> Thanks again for all yall that was concerned enough to ask about her. You
> definitley dont need a stroke, she is in bad shape and not going to be 
> with
> us much longer. So I do my best to check on her daily on the phone and in
> person.
>
> Kevin
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>