[Farmall] Hydraulic Pump

[E. John Puckett]

There should also be a nut loose in there somewhere also, I would fish 
for.  There is also the possibility it is from a previous instance of 
the the nut and washer coming off where the washer was just left in the 
pan.  I would either fix it myself or get it checked though, if the gear 
comes off the shaft it may damage that gear or one of the other gears in 
the front of the engine.

Dale wrote:
> During?a recent oil & filter change, I probed into the oil drain plug hole?to see if there was any metal in the pan, only to find a rather large washer (which I was able to pull out)!? A local mechanic identified it as the lock washer (about 1" with a locking tab on the inside edge) from the hydraulic pump.?Since we have a belly mower installed,?he asked if the "Touch Control" was working.? I answered "yes" and he said just keep using it until it quits working.? THEN have it fixed.? Another mechanic said he would fix it now, since it could damage something (he mumbled!).? What should I do?
>
> Dale Finch
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
>
>
>
>   

-- 
 John
another one of them
*.?-!.* cub owners