[Farmall] Reproduction sheet metal

[Ferg8n9n at aol.com]

there are good used parts out there, i sell only oem stuff.
 
 
In a message dated 3/29/2008 12:23:51 P.M. Central Daylight Time,  
jthall at worldnet.att.net writes:

Its one  with the screen wire. I know somebody carries the 2 different types 
of  grills with screen wire--not  certain if Steiner does or if it is  OEM.

John

----- Original Message ----- 
From: "Larry &  Barb Dotson" <dotson at loganrec.com>
To: "Farmall/IHC mailing list"  <farmall at lists.antique-tractor.com>
Sent: Saturday, March 29, 2008  8:10 AM
Subject: Re: [Farmall] Reproduction sheet metal  parts


> John
> Which grill is this? is it the screen type  or the 11 bar that they just 
> came
> out with?  What year  is your tractor?
>
> Larry
>
>
> ----- Original  Message ----- 
> From: "John Hall"  <jthall at worldnet.att.net>
> To: "Farmall/IHC mailing list"  <farmall at lists.antique-tractor.com>
> Sent: Friday, March 28, 2008  10:13 PM
> Subject: Re: [Farmall] Reproduction sheet metal  parts
>
>
>> The grill came from Steiner. Considering  everything was painted, I didn't
>> bother to call--it was more like  Dremel tool to the rescue. Now had this
>> been a restoration instead  of a really nice paint job on a working
>> tractor,
>> I'd  be pretty well steamed.
>>
>> Of course had this been a  restoration I would have fit everything 
>> together
>>  before taking it apart for painting.
>>
>> John
>>  ----- Original Message ----- 
>> From: "Bob Currie"  <tracturs at att.net>
>> To: "Farmall/IHC mailing list"  <farmall at lists.antique-tractor.com>
>> Sent: Thursday, March  27, 2008 11:16 PM
>> Subject: Re: [Farmall] Reproduction sheet metal  parts
>>
>>
>>> John, If companies are  advertising and selling reproduction parts that
>>>  are
>>> bad quality, it would be helpful to know the name of the  outfit. I've 
>>> had
>>> very good luck with most of  the people who advertise in Red Power,,,but
>>> haven't used them  all.
>>>
>>> bobcurrie
>>>
>>>  ----- Original Message ----- 
>>> From: "John Hall"  <jthall at worldnet.att.net>
>>> To: "Farmall/IHC mailing list"  <farmall at lists.antique-tractor.com>
>>> Sent: Thursday,  March 27, 2008 7:00 PM
>>> Subject: [Farmall] Reproduction sheet  metal parts
>>>
>>>
>>>> As a last  minute thought, we ordered a new grill for dads Cub before  we
>>>> painted it. The hood was off so we never got a chance  to see how it fit
>>>> until after the painting was done. The  center to center spacing of the
>>>> mounting tabs on each side  were off as well as the tabs being welded in
>>>>  the
>>>> wrong location to the bottom causing a poor fit at the  base of the
>>>> radiator.
>>>> Not to mention  the tabs weren't bent out on the ends to help them stay
>>>>  under
>>>> the screws. Anybody else running into poor quality  parts lately?
>>>>
>>>>  John
>>>>
>>>>  _______________________________________________
>>>> Farmall  mailing list
>>>>  http://www.antique-tractor.com/mailman/listinfo/farmall
>>>
>>>  _______________________________________________
>>> Farmall  mailing list
>>>  http://www.antique-tractor.com/mailman/listinfo/farmall
>>
>>  _______________________________________________
>> Farmall mailing  list
>>  http://www.antique-tractor.com/mailman/listinfo/farmall
>
>  _______________________________________________
> Farmall mailing  list
> http://www.antique-tractor.com/mailman/listinfo/farmall  

_______________________________________________
Farmall mailing  list
http://www.antique-tractor.com/mailman/listinfo/farmall





**************Create a Home Theater Like the Pros. Watch the video on AOL 
Home.      
(http://home.aol.com/diy/home-improvement-eric-stromer?video=15&ncid=aolhom00030000000001)