[AT] 930 case hydraulic filter and gaskets

[Mike]

Should've asked them if they ship UPS, would have only cost about $6-7, unless you needed them ASAP. Mike

-- Cecil Bearden <crbearden at copper.net> wrote:
Went to the Case dealer about 70 miles away and got the gaskets and 
filter.  Had the numberfs from the online parts so it was easy.  Got an 
extra filter for the other 930 on Propane.  Got back and put it back 
together put in new oil and it works as good as new.  Oh, the suction 
screen was a brass screen 2 inch dia brazed to a steel ring that was 
held in with a snap ring.  Screen was $37+ and a 3 day wait for one...   
I stopped by Ace hardware and got a foot of screen wire for $1.08 and 
wrapped it around the suction intake and held it in place with a hose 
clamp.  It works like it always did.  $38 in parts, $40 in gas 1 1/2 
days in time, and it works good as new....

Cecil in OKla
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at


____________________________________________________________
Scan, remove and block Spyware. Click now!
http://thirdpartyoffers.juno.com/TGL2131/fc/Ioyw6iieeW5mcMjneBRzvYcBk5b4duIw1upz2t295UvW9PBEubOXIr/