[AT] Ford 3000

charlie hill chill8 at suddenlink.net
Sun Jul 27 04:22:16 PDT 2008


Don, it sounds like the lift is set in the float or draft position (which is 
intended to keep the implement at a set depth in the ground) and  maybe the 
"draft" is not properly adjusted.

Charlie
----- Original Message ----- 
From: "Don Bowen" <don.bowen at earthlink.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Saturday, July 26, 2008 9:23 PM
Subject: [AT] Ford 3000


>I helped a friend buy a Ford 3000 today.  It is a clean tractor with a 
>spritz can paint job but mechanically very sound with a Select-O-Speed.  It 
>does have a lift problem.  The lift goes up and stays at the full up 
>position with no problem.  But when using an implement the arms drift up 
>and down.  What could be the problem?
>
> Also the serial number is C1040645D028.  We are looking for the year.
>
> Don Bowen      KI6DIU
> http://www.braingarage.com/Dons/Travels/journal/Journal.html
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at 




More information about the AT mailing list