[AT] Adding electric starter

[Keith Kinney]

George
What kind of drill motor is that?
Keith



At 09:59 PM 1/2/2008, you wrote:
>Here's how I start Cubs that have been sitting for a long time.  It's 2
>speed so I can turn them at 300 RPM to start or 1200 RPM to get the lube
>system checked out.
>
>http://www.gwill.net/Album/Tractors/Farmall/Cubs/57_Scotty/holehaawg3.jpg
>
>George Willer
>
> > -----Original Message-----
> > From: at-bounces at lists.antique-tractor.com [mailto:at-
> > bounces at lists.antique-tractor.com] On Behalf Of John Hall
> > Sent: Wednesday, January 02, 2008 7:36 PM
> > To: Antique tractor email discussion group
> > Subject: Re: [AT] Adding electric starter
> >
> > The IH dealer dad worked for also carried Wisconsin engines. The mechanics
> > rigged up a something along those lines for cranking the ones without
> > starters.
> >
> > John
> >
> > ----- Original Message -----
> > From: "Dave Ernst" <shop at cccomm.net>
> > To: "Antique tractor email discussion group" <at at lists.antique-
> > tractor.com>
> > Sent: Wednesday, January 02, 2008 3:28 PM
> > Subject: Re: [AT] Adding electric starter
> >
> >
> > > My electric starter for stubborn engines is a 1/2" drill motor.  Welded
> > a
> > > 1/2" stud centered on the end of a stub piece of pipe and have adapted
> > > several according to crankshaft diameter, all have the same thing in
> > > common-they are straight slotted to fit against the gib key and relieved
> > > on
> > > the backside to free themselves when the engine fires.
> > >
> > > Dave
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
>
>_______________________________________________
>AT mailing list
>http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
>--
>No virus found in this incoming message.
>Checked by AVG Free Edition.
>Version: 7.5.516 / Virus Database: 269.17.12/1203 - Release Date: 
>12/30/2007 11:27 AM

Keith Kinney
Evansville, Indiana  USA
www.HerculesEngines.com