[Farmall] super c touch control rebuild

[Howard Weeks]

I rebuilt mine about 5 years back and got all the parts from CNGCO in 
Wisconsin.

It wasn't difficult at all but I did have the I&T manual handy and 
made a few notes about the various valves that are under the head on 
the reverse end of the unit.  

Howard in GA

On 2 Apr 2008 at 17:23, Greg Hass wrote:

> 
> The problem you describe can only be fixed by a rebuild. Oil is either 
> bypassing the control valve or is bypassing the piston in the lift cylinder 
> (cylinders); as the arms settle, the system activates to bring the arms back 
> to their original position, thus the pulsing. While not sure, there is a 
> good chance the parts are available at a Case-IH dealer. My source of info; 
> my dad owned one for over 20 years and I spent hundreds of hours in the 
> seat. The touch-control was rebuilt once, but at that time we had the dealer 
> do it.
> Greg Hass 
> 
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall


Howard Weeks
Harlem, GA 
K5JCP