[AT] Voltage regulator

Bill Brueck b2 at chooka.net
Sun Sep 30 17:05:54 PDT 2007


Who knows what kind of response you'll get when you try to take it back, but
I'd say it's worth a try.  They might well be more willing if you're looking
to exchange it for another rather than get your money back.  Especially
since it had been repackaged to begin with.

I shop my local TSC from time to time but there's a new really big Fleet
Farm right next door so I don't know how long they'll be able to stay open.
They seem to change managers a lot, at least they did a couple of years ago.
I was looking for an out of stock and out of production item from them a
while back.  The manager located a bunch of them for me in other stores and
I thought I was all set.  Didn't hear back for a month or so and when I
checked there was a new manager with no knowledge of the deal.  So I started
again.  2 months later, no goodies yet, and a new manager.  I gave up.

B²

Bill Brueck
   Chatfield, Minnesota, USA

Confusion is a higher state of knowledge than ignorance.


-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Ronald L. Cook
Sent: Sunday, September 30, 2007 1:25 PM
To: Antique tractor email discussion group
Subject: Re: [AT] Voltage regulator

Bill,
	I think you are right.  I have done the clean, adjust stuff.  Set
the spring to pull hard enough it would not even come on line unless I
turned on the lights.  And then it just stayed on line.
         Do you really think that yuppie, horsey place will replace that
regulator?  I think they already have, once.  The package was not sealed.  I
should have just left it.

Ron
Salix, IA

Bill Brueck wrote:
> Ron, I think you have a bad regulator.  If you want to mess with it, pull
> the cover off and you'll find the cutout points stuck together.  You might
> be able to get it going again by separating them and cleaning them up with
> emery cloth putting the finishing shine on with some cloth that's really
> worn smooth.  Check the tension on the spring that holds the points apart,
> and experiment with setting that to pull harder.  
> 
> But the TSC folks owe you another regulator.
> 
>> 
> Bill Brueck
>    Chatfield, Minnesota, USA
> 
> Confusion is a higher state of knowledge than ignorance.
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at







More information about the AT mailing list