[AT] New Old Tractor Purchase, was Plowing in Ohio/Long

Thu Sep 20 17:06:58 PDT 2007

Yes, seems like it took longer than I thought once we got off the
interstate.

And we went right thru the middle of Fort AP Hill.  I am used to Camp
Lejune where you bear off to enter the place off the main road, next
thing I know I am seeing "WELCOME TO FORT AP HILL" signs and I'm like
oh, !@#$ did I miss a turn and how will I ever convince them to let me
turn this thing around???!!

The country was pretty up there. When we crossed that big ol' bride
there were some beautiful old and new houses on the riverbanks.  There's
definitely a lot of history in the area for the civil war buff....too
bad my thing's more WWII... ;)

Al

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie hill
Sent: Thursday, September 20, 2007 9:21 AM
To: Antique tractor email discussion group
Subject: Re: [AT] New Old Tractor Purchase, was Plowing in Ohio/Long

Dang.  If you went 30 miles on hwy 3 you could have gone just a few more

miles on 3 and turned onto 360 and it would have taken you back to 295
just 
north of Richmond.  Some of it would have been 2 lane but all of it is
as 
good or better than 3 with not much traffic and a lot of nice scenery.
Oh 
well, I'm sorry I didn't fill you in on that before.

Have you got the bugs out of the Cub yet?

Charlie
----- Original Message ----- 
From: "Al Jones" <aljones at ncfreedom.net>
To: "'Antique tractor email discussion group'" 
<at at lists.antique-tractor.com>
Sent: Wednesday, September 19, 2007 9:00 PM
Subject: Re: [AT] New Old Tractor Purchase, was Plowing in Ohio/Long

> Charlie, I appreciate the compliment.  I have seen a lot of locals
move
> some BIG tractors on a trailer with NO chains!
>
> Yes that bridge on 295 was un-nerving.  I get the heebie-jeebies just
on
> the big bridge at New Bern.  We went out on 95 right through Richmond.
> It wasn't so bad on Saturday, but it was bad enough I didn't much want
> to go back through with a tractor on the trailer.  At one point it
looks
> like the road is going to send you careening right into the dome of a
> big church just before the road banks hard to the right....anyway we
got
> off onto Hwy. 3 and took that about 30 miles and then a couple more
> turns and we were there.  It was actually very easy to find.
>
> The hardest driving of the trip was negotiating into the shopping
center
> parking lot by the Olive Garden in Greenville!  It didn't help that
> E-Z-U had a game that day......
>
> Al
>
> -----Original Message-----
> From: at-bounces at lists.antique-tractor.com
> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie
hill
> Sent: Wednesday, September 19, 2007 8:36 AM
> To: Antique tractor email discussion group
> Subject: Re: [AT] New Old Tractor Purchase, was Plowing in Ohio/Long
>
> Al, I meant to write back before you left and ask you exactly where
you
> were
> going to pick it up but I forgot until it was too late.  It's possible
> that
> it might have been easier for you to get off of 295 (or 95) onto 360
and
> go
> in the back way.  The scenery would have been better if nothing else
but
>
> it's too late for that now.
>
> I was just kidding you about your  chain down job.  Actually I was
> impressed.  You had it chained up like a pro.
>
> I've been through Richmond on I 95 one time since 295 opened.  It's a
> good
> bit closer that way but that one trip reminded me why I don't do it.
> That
> bridge is a bit discomforting.  I don't really mind high or long
bridges
> but
> that one is strange.  It's a suspension bridge with only one set of
> towers
> and cables down the middle and 3 hugh concrete lanes cantilevered off
> the
> sides.  I can't imagine what the stresses on that thing must be with
> loaded
> tractor trailers running in those outside lanes.  I wish I could see
the
>
> structure under it.  Then again maybe it's just as well I can't.
>
> Charlie
> ----- Original Message ----- 
> From: "Al Jones" <aljones at ncfreedom.net>
> To: "'Antique tractor email discussion group'"
> <at at lists.antique-tractor.com>
> Sent: Tuesday, September 18, 2007 10:43 PM
> Subject: Re: [AT] New Old Tractor Purchase, was Plowing in Ohio/Long
>
>
>> Charlie,
>>
>> My philosophy when I tie a tractor down is I want it to be so if the
>> trailer comes loose, passes the truck, jumps a median, takes out a
>> guardrail, flips twice end over end, hits a tree, and comes to rest
on
>> its side; the tractor will STILL be tied down to the trailer!
>>
>> This was the longest trip I have ever made pulling something like
> this.
>> It wasn't too bad going southbound on 95 on a Saturday afternoon.  I
>> made the mistake of staying on 95 through Richmond.  I came back
> around
>> it on 295 and that was much easier--though crossing the James River
> made
>> me a little squeamish--I don't like big bridges.  IT pulled real good
>> and the gas mileage was better than I was afraid--just a shade under
>> 15MPG.
>>
>> Plus, we got to go through Greenville and eat at the Olive Garden for
>> supper. :)
>>
>> Al
>>
>> -----Original Message-----
>> From: at-bounces at lists.antique-tractor.com
>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie
> hill
>> Sent: Tuesday, September 18, 2007 8:10 AM
>> To: Antique tractor email discussion group
>> Subject: Re: [AT] New Old Tractor Purchase, was Plowing in Ohio/Long
>>
>> Looks nice from here Al.  I don't think you had to worry about it
>> jumping
>> off of the trailer either.  grins.
>>
>> Glad you had a good and trouble free trip.
>>
>> Charlie
>> ----- Original Message ----- 
>> From: "Al Jones" <aljones at ncfreedom.net>
>> To: "'Antique tractor email discussion group'"
>> <at at lists.antique-tractor.com>
>> Sent: Monday, September 17, 2007 8:16 PM
>> Subject: Re: [AT] New Old Tractor Purchase, was Plowing in Ohio/Long
>>
>>
>>> Charlie, here's a picture one the way home at a Wendy's, I believe
we
>>> were near Richmond.
>>>
>>> http://farm2.static.flickr.com/1030/1389121391_fa9345cb07.jpg
>>>
>>> I'll summarize by posting what I copied/pasted from the Red Power
>> Forum.
>>>
>>> I found it on Ebay, 5 hrs. away in King George, VA. We had a fun
> trip.
>>> This was the longest I have ever pulled my trailer and it did great.
>> (I
>>> forgot to grease the wheel bearings!  It did ok though.)
>>>
>>>
>>> The 6 volt charging system WORKS! You have to give it a little RPM
> but
>>> it does indeed appear to be charging the battery.... one headlight
>> still
>>> works. The rear light is not original and appears to have one of the
>> old
>>> pancake style sealed beam lights wedged in there.
>>>
>>> It very much has the "Sherwin Williams Restoration" going on. Paint
>>> right over old grease/dirt in many places. The tin looks pretty good
>>> though. Not all beat up. From 50 feet away, it looks nice.
>>>
>>> The set screw holding the RH steering arm is in bad shape--right
much
>>> flop, but the steering gear itself is pretty tight. LH tie rod looks
> a
>>> little tweaked.
>>>
>>> It has the newer ZENITH carb. A little bit-a choke and the little
>> booger
>>> fires right up. It has a definate miss though, one cylinder sounds
>> plumb
>>> dead. My heart sank to my stomach the first time I heard it run.
> But,
>> I
>>> think/hope the miss is a bad plug, bad plug wire, needs a tuneup,
> etc.
>>> It starts up and runs too good to have more serious trouble--I hope.
>> In
>>> other words, I hope I haven't bought myself a paperweight.....  It
> has
>>> been changed over to IH distributor ignition--no magneto.
>>>
>>> The touch control wouldn't work this evening and when I checked it,
> it
>>> was way low on fluid--I found that there's a pinhole leak on the
>>> pressure line where it's soldered (?) to the block which bolts to
the
>>> back of the hyd. pump. I added a little fluid and the system works
>> fine
>>> with no load. So I gotta get that brazed. My first fear was the pump
>> was
>>> bad and pumping Hy-Tran into the engine. That doesn't seem to be
>>> happening but I'll have to keep it watched.
>>>
>>> The brakes are good enough I can stall it in any gear. (OR should
> that
>>> be: the engine's in such bad shape I can stall it in any gear?
> Again,
>> I
>>> hope it ain't a paperweight.....  )
>>>
>>> Seems to smoke just a touch at startup or when I "loaded" it with
the
>>> brakes. Maybe that's just because it hasn't been run much---or see
>>> above!
>>>
>>> OH--the oil gauge--it's the older gauge with the IHC emblem on the
>> face
>>> instead of the IH. Did any Cub's ever have that gauge? From the
looks
>> of
>>> things it's a '49 by the S/N but I gotta go look if it's early,
late,
>> or
>>> whatever. Most of the codes on it are late '48 that I have looked at
>> so
>>> far.
>>>
>>> It has Goodyear tires all the way around. One front is a
replacement,
>>> but I am suspicious that the other three may be original. If not,
> they
>>> are way-old. Wish they had some sorta date code I could read.
>>>
>>> In general, I wish this tractor could talk and tell me what it's
seen
>>> and done. As I said, all the mounting holes except the ones for the
>>> drawbar have cork in them, except also for the two lower ones on the
>>> clutch housing. I wonder if it didn't do a lot of sicklebar mowing
or
>>> belt work. It has the belt pulley attachment on it, but the flat
>> pulley
>>> is gone--it has the sicklebar mower pulley (I think) on it instead.
>> Cubs
>>> around here cultivated, cultivated, cultivated. And put out lots of
>>> fertilizer at the same time. This one doesn't appear to have done as
>>> much as that. I got it as a bare tractor--no implements, not even a
>>> drawbar.
>>>
>>> I have to confess: I bought it with the idea of possibly re-selling
> it
>>> for a modest "profit." It's beginning to grow on me though  ...and
> the
>>> seat is actually very comfortable....
>>>
>>> Al
>>>
>>> -----Original Message-----
>>> From: at-bounces at lists.antique-tractor.com
>>> [mailto:at-bounces at lists.antique-tractor.com] On Behalf Of charlie
>> hill
>>> Sent: Sunday, September 16, 2007 9:52 AM
>>> To: Antique tractor email discussion group
>>> Subject: Re: [AT] Plowing in Ohio/Long
>>>
>>> Al, give us an update.  How was the trip, was the Cub as advertised,
>>> etc.?
>>>
>>> Charlie
>>>
>>>
>>>
>>> _______________________________________________
>>> AT mailing list
>>> http://www.antique-tractor.com/mailman/listinfo/at
>>>
>>>
>>> -- 
>>> No virus found in this incoming message.
>>> Checked by AVG Free Edition.
>>> Version: 7.5.487 / Virus Database: 269.13.21/1010 - Release Date:
>>> 9/15/2007 7:54 PM
>>>
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>>
>> -- 
>> No virus found in this incoming message.
>> Checked by AVG Free Edition.
>> Version: 7.5.487 / Virus Database: 269.13.22/1015 - Release Date:
>> 9/18/2007 11:53 AM
>>
>>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.5.487 / Virus Database: 269.13.25/1018 - Release Date: 
> 9/19/2007 3:59 PM
> 

_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at