[AT] Farmall B hydraulic

[Jerry Rhodes]

Cecil, I have a pump/tank/valve setup that was on a Cocksock 30 that was 
mounted to the PTO on the rear that ran a front bucket, I
ll get some pics in the morning an send to you if you would be interested, 
we can talk $s if it would work for you, later

Jerry NW Ohio

----- Original Message ----- 
From: <farmall36 at vci.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Saturday, September 01, 2007 5:01 PM
Subject: Re: [AT] Farmall B hydraulic


>I think you would be better off with a crank run pump out in front, and
> cheaper. Thats if you have a pump laying around off an old frontend loader
> or other.
> Or look on ebay, junkyards ? for the little pumps that come on these, and 
> im
> not sure what it would take to add hyd to a non hyd model. I know that we
> used to have a B without hyd and got rid of it for a super C that has hyd 
> on
> it.
> But the hyd system only holds 2 quarts to run the fast hitch that dont 
> have
> enough capacity to run a cylinder.
> Then them pumps are HIGH priced and usually go bad at the seal, the seal
> wears a groove in the shaft letting the oil out around it and into the
> engine.
> Sorry I couldnt be of more help, maybe someone else has a better idea.
> Kevin
> ----- Original Message ----- 
> From: "Cecil Bearden" <crbearden at copper.net>
> To: "Antique tractor email discussion group" 
> <at at lists.antique-tractor.com>
> Sent: Saturday, September 01, 2007 6:27 AM
> Subject: Re: [AT] Farmall B hydraulic
>
>
>>
>>
>> I brought home a Farmall B yesterday that has been flooded by the recent
>> Hurricane leftovers that hit our area.  It had about 3 ft of water over
>> the hood.  It was supposed to run before this happened.  It was in the
>> barn when this happened.  It was supposed to be complete, but when we
>> pulled it out of the barn the seat and air cleaner were missing.   I
>> also noticed that it had been converted to 12 volt alternator system.  I
>> have a belly mount sickle mower from an AC tractor that I think I can
>> mount on it...
>> I need to get a hydraulic system on it to pull the grain drill.  Was
>> there a system that mounted a hydraulic pump between the distributor and
>> the engine for the B series??
>>
>>
>>
>> Cecil in OKla
>>>
>>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>