[AJD] MPI assistance

[Dean Van Peursem]

John:

The MPI yields the following information:

F646AN was used on the following Row Crop cultivator models:

40 or 41    PC = 531
400		PC = 122
4600		PC = 495

These all look like they were made well after the Killifer acquisition.  I
have parts catalogs (PC) and probably Operators Manuals for all of these
cultivators so I can send pictures for further identification if necessary.
My guess at the moment is that you have a model 40 or 41 cultivator


-----Original Message-----
From: antique-johndeere-bounces at lists.antique-tractor.com
[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf Of
JDNut at aol.com
Sent: Sunday, October 21, 2007 10:18 PM
To: antique-johndeere at lists.antique-tractor.com
Subject: [AJD] MPI assistance

AJD list members,

One of my tractors (a quite early "50N") came with a front cultivator.    I 
have purchased several Operator's Manuals, and have yet to find the right 
manual.   There is some resemblance to the B200 series cultivators.   The
only part 
that I can find numbers on is the fitting on the end of the horizontal bars 
that attaches to the truss rods.

As best as I can tell, the part number (or casting number?) is F 646-A.
Any 
assistance on which cultivators this part belongs would be greatly 
appreciated.

This has been an interesting tractor.   It had a Baker valve, and on the
rear 
a Killifer ABG 57 set of parallelogram type attachments for rear
cultivators. 
  A governor driven hydraulic pump drives a CharLynn power steering unit.   
Any information anyone has on any of the above, I would enjoy hearing it.

Take care, 

John Maxwell
Ferndale, CA


**************************************
 See what's new at 
http://www.aol.com

_______________________________________________
Antique-johndeere mailing list
http://www.antique-tractor.com/mailman/listinfo/antique-johndeere