[AT] Massey Harris Hydraulic Parts

[farmall36 at vci.net]

Jon   just went and checked  on what they had on them. One pump and lines 
back to about the seat, no tanks. Im not sure wether someone helped their 
self or if the tanks were off when I got them. I know the tin was off  when 
I got them. Theres a chance the tanks and other pump could be still at the 
fellas place where I bought them. Its a chance I dont know ? There is 
another pump in the shed down here that come with the tractors, but I was 
under the impression that it run off the crank. Me not being interested in 
nothing but the hubs and pan rears. Anyways I will check with previous owner 
tomarrow. One of these has a short hyd cyl with a valve on it, dont know 
much about MH tractors ?
Let me know if you want me to check with PO and if you want the stuff I 
have.
Kevin
----- Original Message ----- 
From: "Jon Fridgen" <jon.fridgen at gmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, October 30, 2007 4:13 PM
Subject: Re: [AT] Massey Harris Hydraulic Parts


> Kevin,
> I believe the parts would be the same from a MH30... The components I 
> would
> need are the pump from the side of the engine, the hydraulic tank in front
> of the radiator, and the oil line between the tank and the pump.
>
> Thanks in advance for your help...
>
> -Jon
>
> P.S. I appologize if you receive this message twice - I've been having 
> some
> problems w/ email/internet...
>
>
> On 10/26/07, farmall36 at vci.net <farmall36 at vci.net> wrote:
>>
>> Jon,  Theres a couple MH 30s out in the pasture are the parts the same ?
>> If
>> so let me know what you need and I will look when we go feed in a bit.
>> I bought the old tractors for the rear rims and hubs (9 bolt   2 3/4"
>> hubs)
>> I been thinking about useing one of the rear ends weld up a front frame
>> and
>> run a Mopar 340ci    727 auto into it. Since I have a good 340 engine
>> setting in the shop floor. But that will not need hydraulics just a
>> drawbar,
>> make a good toy/ wagon tractor. Let me know  so I can look for it gets
>> dark.
>> Kevin
>>
>>
>>
>> ----- Original Message -----
>> From: "Jon Fridgen" <jon.fridgen at gmail.com>
>> To: <at at lists.antique-tractor.com>
>> Sent: Friday, October 26, 2007 3:28 PM
>> Subject: [AT] Massey Harris Hydraulic Parts
>>
>>
>> >I had some time over the past week to do some work on my Massey Harris
>> >44...
>> > I would like to get the hydraulic system working on the tractor,
>> however,
>> > I
>> > am in need of a pump and the oil reservoir that mounts in front of the
>> > radiator. Does anyone know of a good source for these parts? I've done
>> > some
>> > searching, but haven't come up w/ anything yet.
>> >
>> > Any suggestions are greatly appreciated.
>> >
>> > The best,
>> > -Jon
>> >
>> > --
>> > Jon Fridgen
>> > jon.fridgen at gmail.com
>> >
>> > _______________________________________________
>> > AT mailing list
>> > http://www.antique-tractor.com/mailman/listinfo/at
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
>
>
> -- 
> Jon Fridgen
> jon.fridgen at gmail.com
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>