[AT] 504 Farmall bearing cage

[Mark Greer]

Try T M S / Stoller Tractor at 330-669-3676. Ask for Tom. They are a BIG
tractor salvage yard near Sterling, Ohio and should be able to ship the part
UPS.
Mark

----- Original Message ----- 
From: <farmall36 at vci.net>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Tuesday, October 23, 2007 3:58 AM
Subject: Re: [AT] 504 Farmall bearing cage


> Sledride,  I called them this morning and they said they would try to find
> one and call back. I was hoping that someone had an old 340-504 parts
> tractor laying around. None of the local tractor boneyards had either of
> these tractors. I carried it to the local machine shop this AM and he said
> he could not make one. Only setup for engines, in the AM im going over to
> Dawson Springs where I know they can make one.
> I think that I can make one myself, if I can find a pipe 5" out side that
> the bearing will fit in. A 3/8" plate and a1/4" plate for the top then
just
> true everything up and weld it together. Biggest problem is going to be
> finding the 5"OD pipe the will accept the bearing on the inside.
> I guess I need a lathe Need need need is what I do most , well hunting for
> tools ect. I keep tools in the shop and 4 other buildings, if I put them
all
> in the shop I couldnt find anything either as it is loaded already.
> Thanks for the info sledride.
>
> Kevin Mosier
>
>
>
> ----- Original Message ----- 
> From: "sledride" <sledride at gogtt.net>
> To: "Antique tractor email discussion group"
<at at lists.antique-tractor.com>
> Sent: Monday, October 22, 2007 11:46 AM
> Subject: Re: [AT] 504 Farmall bearing cage
>
>
> >I B Atmus in Springfield MA.Tele # 413-736-4551
> > ----- Original Message ----- 
> > From: <farmall36 at vci.net>
> > To: "Antique tractor email discussion group"
> > <at at lists.antique-tractor.com>
> > Cc: "Farmall/IHC mailing list" <farmall at lists.antique-tractor.com>
> > Sent: Monday, October 22, 2007 11:16 AM
> > Subject: [AT] 504 Farmall bearing cage
> >
> >
> >> Hi   does anyone know where I could purchase a lower bearing cage for
the
> >> lower bearing on the front end of a 504. I think the 340 has the same
> >> setup ? Any help on this I would be appreciated.
> >> Kevin Mosier
> >> _______________________________________________
> >> AT mailing list
> >> http://www.antique-tractor.com/mailman/listinfo/at
> >>
> >
> > _______________________________________________
> > AT mailing list
> > http://www.antique-tractor.com/mailman/listinfo/at
> >
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>