[Farmall] F-30 STEERING WHEEL AND SHAFT

[John Wilkens]

Once again my head got screwed on backwards!  I was totally wrong 
about my "F-20 having a 16 " wheel."  It isn't an F-20, It's an 
F-12....with 16" wheel.  I've had it for over a year ahd haven't had 
time to get to work on it.  Just forgot what I had!     John W.



At 06:04 AM 11/13/2007, you wrote:
>The F-20 and F-30 used the same 17-3/4" or 18" wheels. The 16" wheel 
>is for the F-12/14. The letter series wheel with bare metal spokes 
>and the rubber rim was never used on the F-series from the factory. 
>The composite wheels on the F-series all had rubber or plastic covered spokes.
>
>
>-----Original Message-----
>From: John Wilkens <jwilkens at eoni.com>
>To: Farmall/IHC mailing list <farmall at lists.antique-tractor.com>
>Sent: Mon, 12 Nov 2007 5:11 pm
>Subject: Re: [Farmall] F-30 STEERING WHEEL AND SHAFT
>
>
>
>I have two F30's and an F20.  The F20 has a 16" 4 flat spoke steel
>wheel, one F30 has an 18" 4 flat spoke steel wheel, and the other F30
>has a steering wheel that looks just like the one on my Farmall H (3
>spokes and a rubber covered wheel).      John W.
>
>
>
>At 10:03 AM 11/12/2007, you wrote:
> >I would be surprised if the steering wheel is
> >different from and F-20.  Can anyone confirm or refute
> >this?  F-20s are much more common so the wheel may not
> >be that hard to get.
> >
> >Bob, got the maessage.  Thanks for looking!
> >
> >
> >--- Bob Currie <tracturs at att.net> wrote:
> >
> > > Try advertising on the classified ads in the major
>
>
>________________________________________________________________________
>Email and AIM finally together. You've gotta check out free AOL 
>Mail! - http://mail.aol.com
>
>_______________________________________________
>Farmall mailing list
>http://www.antique-tractor.com/mailman/listinfo/farmall


                    In the wide-open spaces of NE Oregon