[AT] IH504 wide front

[oldiron62 at gmail.com]

Mark I called them past monday, and they were to call back.  No call as of 
yet ??  Like i was saying im going to use  the rear off a JD 45 combine, try 
it anyway.
Today I got the 504 back together with the $300 machined part (bearing cage) 
And it works like new again. I just need to get that pedastal off there so 
all the weight is on the center pivot pin on the wide front.
Ya have either of the parts that bolt the front to the frame or the rear one 
that holds the ball those would have to be off a 460 as 560 is wider ?
Also need the arm that the tierods attach to in the center
That will help alot Ithink one off a 460 will work as 560 is wider The arm 
the tierods hook to in the center would be the same off either.


Kevin Mosier


----- Original Message ----- 
From: "Mark Greer" <greerfam at raex.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Monday, November 19, 2007 8:32 AM
Subject: Re: [AT] IH504 wide front


> Try T M S / Stoller Tractor at 330-669-3676. Ask for Tom. They are a BIG
> tractor salvage yard near Sterling, Ohio with a focus on IH. They usually
> have anything I ask about.
> Mark