[AT] Massey Harris Hydraulic Parts

[farmall36 at vci.net]

Jon  you want these parts ?
Let me know and I will get them off and packed up for DHL - UPS  or what 
ever shipper you use.
Kevin Mosier

----- Original Message ----- 
From: "Jon Fridgen" <jon.fridgen at gmail.com>
To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
Sent: Wednesday, October 31, 2007 12:38 PM
Subject: Re: [AT] Massey Harris Hydraulic Parts


> Kevin,
> At least the pump is still there. The short hydraulic cylinder w/ valve 
> that
> you are refering to would mount directly beneath the seat - hence the
> hydraulic lines running back there. This is what MH used to provide
> hydraulic power to drawn equipment or mounted corn pickers, etc.
>
> Its very likely the other pump you have could have been powered off of the
> crank. I've seen cases where guys have added an additional pulley up front
> to run a belt driven pump - my Grandpa had done that w/ the MH 44 diesel 
> he
> had. It never seemed to work too well though.
>
> If nothing else, I would be definitely interested in the pump and
> potentially that valve/cylinder combo (depending on its condition).
>
> Thanks for all your help.
>
> -Jon
>
>
> On 10/30/07, farmall36 at vci.net <farmall36 at vci.net> wrote:
>>
>> Jon   just went and checked  on what they had on them. One pump and lines
>> back to about the seat, no tanks. Im not sure wether someone helped their
>> self or if the tanks were off when I got them. I know the tin was
>> off  when
>> I got them. Theres a chance the tanks and other pump could be still at 
>> the
>> fellas place where I bought them. Its a chance I dont know ? There is
>> another pump in the shed down here that come with the tractors, but I was
>> under the impression that it run off the crank. Me not being interested 
>> in
>> nothing but the hubs and pan rears. Anyways I will check with previous
>> owner
>> tomarrow. One of these has a short hyd cyl with a valve on it, dont know
>> much about MH tractors ?
>> Let me know if you want me to check with PO and if you want the stuff I
>> have.
>> Kevin
>> ----- Original Message -----
>> From: "Jon Fridgen" <jon.fridgen at gmail.com>
>> To: "Antique tractor email discussion group" 
>> <at at lists.antique-tractor.com
>> >
>> Sent: Tuesday, October 30, 2007 4:13 PM
>> Subject: Re: [AT] Massey Harris Hydraulic Parts
>>
>>
>> > Kevin,
>> > I believe the parts would be the same from a MH30... The components I
>> > would
>> > need are the pump from the side of the engine, the hydraulic tank in
>> front
>> > of the radiator, and the oil line between the tank and the pump.
>> >
>> > Thanks in advance for your help...
>> >
>> > -Jon
>> >
>> > P.S. I appologize if you receive this message twice - I've been having
>> > some
>> > problems w/ email/internet...
>> >
>> >
>> > On 10/26/07, farmall36 at vci.net <farmall36 at vci.net> wrote:
>> >>
>> >> Jon,  Theres a couple MH 30s out in the pasture are the parts the same
>> ?
>> >> If
>> >> so let me know what you need and I will look when we go feed in a bit.
>> >> I bought the old tractors for the rear rims and hubs (9 bolt   2 3/4"
>> >> hubs)
>> >> I been thinking about useing one of the rear ends weld up a front 
>> >> frame
>> >> and
>> >> run a Mopar 340ci    727 auto into it. Since I have a good 340 engine
>> >> setting in the shop floor. But that will not need hydraulics just a
>> >> drawbar,
>> >> make a good toy/ wagon tractor. Let me know  so I can look for it gets
>> >> dark.
>> >> Kevin
>> >>
>> >>
>> >>
>> >> ----- Original Message -----
>> >> From: "Jon Fridgen" <jon.fridgen at gmail.com>
>> >> To: <at at lists.antique-tractor.com>
>> >> Sent: Friday, October 26, 2007 3:28 PM
>> >> Subject: [AT] Massey Harris Hydraulic Parts
>> >>
>> >>
>> >> >I had some time over the past week to do some work on my Massey 
>> >> >Harris
>> >> >44...
>> >> > I would like to get the hydraulic system working on the tractor,
>> >> however,
>> >> > I
>> >> > am in need of a pump and the oil reservoir that mounts in front of
>> the
>> >> > radiator. Does anyone know of a good source for these parts? I've
>> done
>> >> > some
>> >> > searching, but haven't come up w/ anything yet.
>> >> >
>> >> > Any suggestions are greatly appreciated.
>> >> >
>> >> > The best,
>> >> > -Jon
>> >> >
>> >> > --
>> >> > Jon Fridgen
>> >> > jon.fridgen at gmail.com
>> >> >
>> >> > _______________________________________________
>> >> > AT mailing list
>> >> > http://www.antique-tractor.com/mailman/listinfo/at
>> >>
>> >> _______________________________________________
>> >> AT mailing list
>> >> http://www.antique-tractor.com/mailman/listinfo/at
>> >>
>> >
>> >
>> >
>> > --
>> > Jon Fridgen
>> > jon.fridgen at gmail.com
>> >
>> > _______________________________________________
>> > AT mailing list
>> > http://www.antique-tractor.com/mailman/listinfo/at
>> >
>>
>> _______________________________________________
>> AT mailing list
>> http://www.antique-tractor.com/mailman/listinfo/at
>>
>
>
>
> -- 
> Jon Fridgen
> jon.fridgen at gmail.com
>
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>