[AT] Case VAC

[Easley, Greg]

Don Livingston
Rusty Acre
18024, 540 Avenue
Austin, MN 55912
(507) 433-0073
manifold at smig.net

Don is the guru of Case parts.  I've bought a good bit of stuff from
him, both
new and used, over the years.  He's a busy guy and can sometimes be hard
to reach,
but is straight up honest and just an all-around nice guy to work with.

Geez... that almost sounds like a commercial...  seriously, anybody that
works,
collects, restores or pulls Case tractors needs to know about Don.

Greg
http://www.geocities.com/heartland/woods/1416

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of
rdhaskell at juno.com
Sent: Wednesday, March 21, 2007 12:27 AM
To: at at lists.antique-tractor.com
Subject: Re: [AT] Case VAC

Thanks Greg.  Who is Don L?  I am not familiar with him.

Ron Haskell
rdhaskell at juno.com
Riverside, California
USA
http://albums.photo.epson.com/j/AlbumList?u=3009370&f=0

On Tue, 20 Mar 2007 21:57:40 -0500 "Easley, Greg"
<EasleyG at health.missouri.edu> writes:
> Don L. has the friction material.  Last set I bought was $30 and came 
> with the rivits.
> All you need to do the job yourself is a drill, hammer, punch and four

> hands.
> Replace the pinion seals while it's apart...
>  
> Greg
> http://www.geocities.com/heartland/woods/1416
_______________________________________________
AT mailing list
http://www.antique-tractor.com/mailman/listinfo/at