[AT] Waste oil burner

[Louis Spiegelberg]

Andy,

I have a 2 drum burner set up.  It uses a small blower motor that is
attached to 1-1/2" pipe.  The drip tube runs inside of the pipe.  The
instruction that came with it says to let the blower run till the unit
cools.  I haven't had a problem with the tube clogging at all.

Here is a link to the company where I bought my unit from. I have the
downdraft unit. http://www.wasteoilburners.us/vaporizing.htm#DOWNDRAFT


Lou

-----Original Message-----
From: at-bounces at lists.antique-tractor.com
[mailto:at-bounces at lists.antique-tractor.com] On Behalf Of Andy Glines
Sent: Monday, March 05, 2007 8:38 AM
To: at at lists.antique-tractor.com
Subject: [AT] Waste oil burner


A long time ago, the list discussed burning waste oil in a wood stove.  The 
set up was pretty basic.  There was a tube run to the center of the stove 
and waste oil allowed to drip onto a hot wood fire.  I have been using this 
set up for awhile with decent results.  I am having trouble with the tube 
clogging up inside the stove.  It seems that the oil is burning inside the 
tube and leaving carbon deposits that clog it up.  Did anyone else have this

trouble?  How do I correct it?

_________________________________________________________________
With tax season right around the corner, make sure to follow these few 
simple tips. 
http://articles.moneycentral.msn.com/Taxes/PreparationTips/PreparationTips.a
spx?icid=HMFebtagline

_______________________________________________
AT mailing list http://www.antique-tractor.com/mailman/listinfo/at