[AJD] Parts Search

[Mike Scholl]

Is it possible that the generator needs to be polarized?

It's been several years since I've done it and can't remember the steps, but 
recall that the symptoms were that the system wouldn't charge.

Good Luck,
Mike


>From: "Rev. Gerber" <drgerber at fuse.net>
>Reply-To: Antique John Deere mailing 
>list<antique-johndeere at lists.antique-tractor.com>
>To: "'Antique John Deere mailing 
>list'"<antique-johndeere at lists.antique-tractor.com>
>Subject: Re: [AJD] Parts Search
>Date: Thu, 29 Mar 2007 10:00:13 -0500
>
>Greg:  I need some help.  I have 15 old 2 cyl. Tractors, 42 LA up to 59
>440C.  Most are 6 volt. Systems; a few changed to 12 volt by somebody
>else.  I just restored the 42 LA, put on a new wiring harness from Agri
>Services in NY, nice products I night add, a new cut out, new 3 position
>switch from JD, generator charges when tested with a meter, but I cannot
>get the system to charge, or budge the gauge.
>
>I have seen an article in green magazine about electric systems, seems
>there was a vol. one and a vol. two.
>
>Does anyone put out a video on how to make these systems work, how to
>trouble shoot, etc.?  I am growing weary of $50.00 here and $200.00
>there for generator rebuilds, expensive parts, cut out, regulators, and
>still nothing charges.
>
>Can you steer me to the electrical system guru? Any guidance would be
>appreciated.
>
>Rev. Dr. David R. Gerber
>Mt. Airy United Methodist Church
>2645 North Bend Rd.
>Cincinnati, OH  45239
>Phone: 513-541-0307
>FAX: 513-541-2575
>
>
>-----Original Message-----
>From: antique-johndeere-bounces at lists.antique-tractor.com
>[mailto:antique-johndeere-bounces at lists.antique-tractor.com] On Behalf
>Of greg at theoldtractorcompany.com
>Sent: Saturday, March 24, 2007 10:45 PM
>To: antique-johndeere at lists.antique-tractor.com
>Subject: [AJD] Parts Search
>
>Ok guys, time to try it out
>
>We finally have a rudimentary parts lookup operational. Try it out and
>don't complain about the primitive interface, we are going
>to work on that as time allows!
>
>This will allow you to check your part #'s, JD for now-both current and
>obsolete, against our inventory here at Franktown. Kind
>of similar to the JD Dealer Parts Locator that dealers have access to.
>Eventually we will load up our Hesston, Massey, Ford, IH
>and  other parts here too, have lots of obsolete Massey, lucky me (!).
>This will be the only way to check our obsolete inventory
>as we are no longer on the Deere Parts Locator system.
>
>Go to www.joetraktor.com (www.joetractor.com redirects also) and follow
>the directions.You can bookmark it as that will be the
>permanent location, more changes will occur on that site again as time
>allows. There will be a link off
>www.theoldtractorcompany.com also.
>
>Let me know if it works for you, we need to make sure it does what its
>supposed to.
>
>Rain here today with intermittent snow. It has been 70 all week
>otherwise.
>
>Greg
>
>
>
>
>Greg Stephen
>The Old Tractor Company
>Stephen Equipment Company
>PO Box 709
>Franktown, CO 80116
>303-663-5246
>303-468-0377 FAX<<--GREAT WAY TO REACH ME!
>OR INTERNET FAX 866-381-3703
>
>
>
>
>_______________________________________________
>Antique-johndeere mailing list
>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere
>
>_______________________________________________
>Antique-johndeere mailing list
>http://www.antique-tractor.com/mailman/listinfo/antique-johndeere