[Farmall] Super C Transmission work

Stan Bass headlight at erols.com
Sun Mar 4 05:26:07 PST 2007


Bob,
They built alot of these so I wasn't as worried about parts
availability, more just knowing which ones I needed and how far I needed
to go to clean it up ;)
Stan(VA).

Bob Currie wrote:
> 
> Stan et all:
> Good topic, I have a 51 Super C with same stuff. Whining in 3rd and 4th,
> with a telltale clicking in 4th (chipped tooth?)  When I asked about it
> last year, most folks said the hardest thing would be locating the needed
> parts. That scared me off for the time being. Any comments??
> 
> bobcurrie
> 
> At 11:17 AM 3/3/07, Stan Bass wrote:
> >Anyone have any experience inside the Farmall C or Super C family of
> >transmissions? I have a Super C that howls/grinds in the upper gears,
> >more noticeable the higher you go (in 3rd and 4th it's obvious, probably
> >there in 1st and 2nd also). My 230 does not howl like this at all, so I
> >assumed it's something I should fix. It's not the clunking or ticking
> >you get with broken teeth, but a steady sound. I have the deck plate off
> >now and of course nothing looks obvious, no missing teeth, only thing I
> >see is the oil slinger gear on the lower shaft does wobble some. If it
> >matters, the PO did have a belt driven saw on the back of it when I
> >first saw it; so it probably has some stationary PTO hours. Is it common
> >to need to replace the bearings on the upper shaft? Just a guess since
> >that one's not sitting in the oil.
> >
> >If so, I have the books and need to go hit them next; but I get this
> >sinking feeling that I need to split the torque tube, axles, and PTO off
> >to get to all the bearings on those shafts? Is there any chance of this
> >being done from the top or am I going to need to split this thing in a
> >million pieces...
> >Thanks,
> >Stan(VA).



More information about the AT mailing list