[Farmall] Carburetor problems
Glenn Karch
glenn.karch at verizon.net
Tue Jun 19 19:44:28 PDT 2007
Roger,
If those tractors sit around for a while, the float and needle valve get
gummed up and don't want to work properly. On my M Farmall, sometimes it
will start fine and run until the fuel in the carb runs out. Sometimes I
have to tap on the carb bowl and the needle valve will drop open and then it
starts and runs fine. It may also start better if you only open the
throttle a couple of notches.
Glenn Karch
Hercules Historian
Haubstadt, Indiana, USA
----- Original Message -----
From: <Slab210 at aol.com>
To: <farmall at lists.antique-tractor.com>
Sent: Tuesday, June 19, 2007 9:02 PM
Subject: Re: [Farmall] Carburetor problems
>I had my carburetor rebuilt by a dealer six months ago. I installed it and
> the Farmall H started right away. Since then I have had trouble with it.
> Latest
> problem is that gas runs right through carburetor when I try to start
> tractor.
> Before , the tractor would start and run for 10 min. and stop . now i can
> not
> get it to start at all. any help would be appreciated.
>
> Roger in Ohio
>
>
>
> ************************************** See what's free at
> http://www.aol.com.
>
> _______________________________________________
> Farmall mailing list
> http://www.antique-tractor.com/mailman/listinfo/farmall
More information about the AT
mailing list