[AT] N.H. baler pick-pick up fingers

[joehardy at epix.net]

John: I'm just scrapping (3) NH 77's. If I remember correctly, you have to loosen the chains and disconnect them underneath. You may have to remove one of the straight tracks too. I don't remember exactly what I did but it was a job! I have a good set of needles if you need them. It was a real good baler but all the neighbor kids grew up and couldn't find anyone to handle the the big bales any more. Hope this was of some help....Joe Hardisky Ryman Farm Dallas, PA
> 
> From: "John Hall" <jthall at worldnet.att.net>
> Date: 2007/06/03 Sun AM 06:32:13 EDT
> To: "Antique tractor email discussion group" <at at lists.antique-tractor.com>
> Subject: [AT] N.H. baler pick-pick up fingers
> 
> I've got a Super 66 New Holland baler that needs some of the pick up fingers 
> replaced. I took a quick glance from underneath and I think you can pull off 
> the cam roller and rotate the pipe they are mounted on and slide them out 
> the side of the pickup. Probably have to unbolt them first. Am I right or 
> will I have to be removing all the slats that go in between the fingers, the 
> ones held in by 2 million flat head screws!
> 
> John Hall
> 
> 
> _______________________________________________
> AT mailing list
> http://www.antique-tractor.com/mailman/listinfo/at
>